Google Pixel 6a could borrow the Pixel 6 design, drop the headphone jack

Posted on |

Google Pixel 6a RendersSource: @OnLeaks / 91mobiles

The Google Pixel 6a isn’t expected to be unveiled until early 2022, but renders of the upcoming mid-range phone have already surfaced online, revealing it in all its glory. This is courtesy of prolific leaker Steve Hemmerstoffer (@OnLeaks).

First reported by 91mobiles, The new renders indicate that the Pixel 6a will have a similar design to the standard Pixel 6, making it difficult to tell the two apart. It appears to have the same black camera strip as the Pixel 6 on the back, which houses the two cameras and a flash.

However, the renders lack a key feature that was present on previous mid-range Pixel devices: a 3.5mm headphone jack. If the renders are correct, this means that the Pixel 6a will be the last Google phone to have the port. That said, a USB-C port, speaker, and microphone are visible at the phone’s bottom.

VPN Deals: Lifetime license for $16, monthly plans at $1 & more

On the front, there’s a hole-punch selfie camera. The device may also sport a flat 6.2-inch OLED display and feature an in-display fingerprint scanner, like the Pixel 6 and 6 Pro. The absence of a fingerprint sensor on the back, like the Pixel 5a, gives that away.

The Pixel 6a is slightly smaller than the Pixel 6, as expected. It has dimensions of 152.2 x 71.8 x 8.7mm. On the other hand, the Pixel 6 measures 158.6 x 74.8 x 8.9mm and has a 6.4-inch display. The phone may also have a glass back and dual-tone finish.

It remains to be seen how the phone compares to some of the best budget Android phones, but more leaks are expected to surface in the months leading up to its unveiling.a

Leave a Reply

Your email address will not be published.